Loader Crane

PK 5.501 SLD 5

THE CRANE GEOMETRY IS SIGNIFICANTLY IMPROVED DUE TO THE LINKAGE SYSTEM

  • More power in the hook due to Single Link
  • Shorter load cycle times due to High Speed Extention
  • Higher payloads due to intelligent lightweight design
Enquire Now
High Power Lifting System

High Power Lifting System

The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.

Read More
Paltronic

Paltronic

With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.

High Speed Extension

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Read More
Single Link

Single Link

The knuckle joint significantly improves the crane’s motion geometry.

Technical Data

Technical Data
Lifting Capacities
Technical Data
Max. lifting moment 5.1 mt
Max. lifting capacity 3300 kg
Max. hydraulic outreach 11.1 m
Max. manual outreach 12.7 m
Slewing angle 400°
Slewing torque 0.6 mt
Stabilizer spread (std) 2.9 m
Fitting space required (std) 0.66 m
Width folded 2.10 m
Max. operating pressure 360 bar
Pump capacity 20-30 l/min
Dead weight (std) 750 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.

Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting Capacities
Tech Icon OutreachLifting moment
(mt)
Tech Icon PressureOutreach
(m)
Tech Icon Pump CapacitySlewing angle
(°)
Tech Icon Slewing AngleSlewing torque
(mt)
Tech Icon Slewing TorquePressure
(MPa)
Tech Icon Crane HeightPump capacity
(l/min)
Tech Icon Crane WeightCrane Weight
(kg)
Tech Icon Crane WidthCrane Height
(mm)
Tech Icon Installation WidthCrane Width
(mm)
Tech Icon Liftingoment IconInstallation Width
(mm)
Std 5.1 5.3 400 0.6 36.0 20-30 725 1830 2100 660
A 4.9 7.2 400 0.6 36.0 20-30 795 1830 2100 660
B 4.8 9.2 400 0.6 36.0 20-30 860 1845 2100 660
C 4.6 11.1 400 0.6 36.0 20-30 920 1885 2115 660

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

PK 5.501 SLD 5 Lifting Capacities
Enquire Now
Downloads

Brochures

brochure

PK 5.501 SLD 5

2.64MB
Download
brochure

Crane Tools

25.6MB
Download
Enquire Now
Make An Enquiry

LOADER CRANES